Wet areas such as bathroom, wc, kitchen, balcony,
Pools and terraces
It is applied on surfaces such as concrete, plaster and screed in waterproofing.
It does not make shrinkage crack thanks to its elasticity feature.
It provides easy and fast application.
It can be applied on horizontal and vertical surfaces.
It has superior adherence.
It is applied against positive water pressure.
The surface to be treated must be strong, clean and free of dust.
Care must be taken that the surface is free from substances such as mold oil, paint, dust and cured.
The parts on the surface must be removed (iron, wood, etc.) and the locations of the removed parts must be closed with appropriate Integrated Repair Mortars. Application should be started after moistening on the surface.
Preparation of Mortar
A suitable amount of liquid component (10 kg liquid component / 20 kg powder) is put into the mixing bowl. The entire bag is poured and mixed with the hand mixer until the lumps disappear. The mortar, which is rested for 5 minutes, is mixed again.
With the help of EPODOL®, INTEGRATED PAH BAND should be applied to the joints of the applied surface. In cases where chamfer tape is not preferred, joints should be ovalized and reinforced with mesh.
Fluid mortar is applied with the help of brush or roller. The second layer should be applied perpendicular to the first and at least 6 hours later.
For the last layer application (ceramic, screed and cement based plaster), 3 days should be waited for, and care should be taken not to damage the insulation material mechanically during the coating process.
If the application area is a water tank, the product should be waited for at least 28 days.