Hybrid (polyurea) systems are materials that are mixed by increasing catalyst compared to pure doped polyurea systems. These materials were mixed into pure polyurea systems by blending aramotic polymers. Mixing process is done with catalysts. This structure of the hybrid polyurea does not meet the insulation requirement required when exposed to sunlight and outdoor conditions. These materials are generally used in places with closed air conditions. This material is used to provide waterproofing in areas not exposed to sunlight. Hybrid systems are more economical than aromatic polyurea and therefore lower cost. Hybrid polyurea is obtained by mixing polyurethane and polyurea resins and it is more preferred because it is economical. This material has technical properties as much as pure polyurea. It is known as ordering systems that can be used for surface protection and water insulation.
Hybrid (Polyurea) is often preferred for terrace insulation, which has been used intensively over time. The difference between the hybrid polyurea and the real polyurea is incomparably less. A number of tests are required to detect the hybrid polyurea. When the physical and chemical test results are examined, it turns out that the hybrid polyurea is the best new generation waterproofing material produced. This material is bonded to the floor where it will be applied with a primer, and can be applied in many areas such as pools, terraces, foundations, roofs and so on, without additional location and adhesion problems. The application of hybrid polyurea, which is a two-component system consisting of pe isocyanate, that is prepolymer, is also carried out by spray injection machines that can reach high pressures and temperatures.
These two component hybrid polyurea systems with very fast curing feature are formed by amine finite resin reaction as well as aromatic isocyanate prepolymer. This flexible product is known as 100 percent solid spray coating material.
Hybrid (Polyurea) is applied by our company with expert teams. The application areas of our company are many places such as general waterproofing, water tanks, swimming pools, ponds, water pipes, waterproofing membranes, manhole and wastewater coatings and roofs. Industrial flooring, hospitals, factories, car parks, garage and high traffic floors are also the places where our company serves.
Pure Polyurea is a surface and floor coating system. These systems are developed with a mixture of isocyanate and synthetic polyol and are prepared in two components. It is called elastomer surface coating system. This system can be applied by spray and dries quickly. These systems with high performance and unlimited application thickness can be applied to different areas and surfaces. The first sprayable polyurea appeared in the early 1990s. Polyureas, which are portable and easy to find, can be applied using different equipment. Thanks to the applications, polyureas turn into raw materials, products and services in a very short time.
Polyurea applications should be done by expert teams, and pressure machines should be used during the application. It is necessary to make certain temperature and pressure adjustments of the machines by considering the type of surface to be applied. After these adjustments are made, the material is sprayed to the average thickness. Polyureas formed by the first spray application are discarded as primers. The reason for this is to ensure adhesion to the surface. The liquid sprayed material adheres fully to the surface. No additional glue is required for the bonding process. The polyureas are sprayed onto the coats until the desired average thickness is formed. In this way, it takes its final form by surface. It takes polyureas within 5 to 10 seconds. Approximately 10 seconds after application, you can easily walk on the surface and open the area for use. In case of an additional treatment on the surface after the spray application, the material must mature for 24 hours. During this time, the reaction inside the material ends completely.
Pure Polyurea application has important features. Polyureas reacting quickly without catalyst offer the advantage of coating without additional space. It also maintains its flexibility after application. This solvent-free material also contains no volatile organic components. In addition, the material has the feature of being resistant to ultraviolet rays. This material, which is resistant to chemicals, solvent and acid, provides superior protection against corrosion, it is resistant to salt water and weather conditions with its low permeability feature. It is enough to contact our company to get services related to polyureas.