Dilatation waterproofing is the method applied to cover the joint gaps in buildings. There are gaps left lengthwise in the constructed buildings and these gaps are the result of calculations made in terms of engineering.

Plaster nets are cement and gypsum plaster reinforcements made of glass fiber. It is used to prevent plaster cracks. It meets the needs of the marble and mosaic industry with our products cut in different sizes in different weights.

It protects the concrete from the negative effects of water and moisture by separating the concrete from the soil and removing and draining the water from the building shell. There are many factors that will threaten the insulation under the ground. In order for the insulation to be fully completed, it must also be protected against adverse effects that may occur.

Polymer emulsion modified, cement-based, two-component, fully elastic, CMO2P class waterproofing mortar, especially for demanding conditions where hot and cold changes are high.

It is a paper carrier under-tile waterproofing cover. It is in the form of 20 m2 rolls. (1 m width, 20 m length). It occupies a net area of 18 m2.

Acrylic copolymer resin-based, water-based, single-component, ready-to-use, elastic, easy-to-apply white-colored (overpainted) sliding waterproofing material.

It offers cost-effective solutions to all waterproofing details. It offers performance solutions in applications where UV resistance is required with slate covered products.

It is used for corner turns on exteriors. It is an aluminum corner profile with round holes placed in the corners in order to increase the impact resistance of all corners, window edges in the building and create a flat corner.

They are foam materials that have homogeneous cell structure, produced and used for thermal insulation. Polystyrene, the raw material of XPS, is extruded along the line to the desired thickness by extrusion process. Thanks to this production made under continuous computer control, a stable cell structure with a homogeneous honeycomb appearance is obtained.

Expanded Polystyrene Rigid Foam (EPS-Expanded Polystyren Foam) is a typically white colored thermoplastic material with foam in the form of foam, obtained from petroleum by polymerization of styrene monomer. Products in gray / black tones, where the particles are processed to reflect the long wave radiation in special productions, are also available.

It is a mineral based thermal insulation board. Along with thermal insulation, there is also fire and sound insulation feature. It is A1 class fireproof material.

Hybrid (polyurea) systems are materials that are mixed by increasing catalyst compared to pure doped polyurea systems. These materials were mixed into pure polyurea systems by blending aramotic polymers.